ELASTIC GRINDING AND POLISHING
Thanks to their flexibility, the ARTIFEX tools adapt perfectly to the geometry of the workpiece and merely remove the roughness peaks from the surface. This increases the material contact area and significantly reduces the roughness depth – to less than 1 µm (Rz). The open-pored structure ensures cool grinding and prevents a clogging of the tool.
ARTIFEX Dr. Lohmann GmbH & CO. KG
Highly advanced Rotary Unions and Slip Rings "Made in Germany"
Rotary Unions ROTODISK S-AKM:

- Clamped mechanical seals for aggressive media
- Leakage-free air transmission up to 32,000 rpm
- Suitable for cryogenic machining and diamond/glass processing
- Dual leak chamber for leakage monitoring
- Safeguarding of bearing packages against discharged air (BPS)
- Integrated EMC Slip Ring for spindles with hybrid bearings


Multi-channel Rotary Unions for high-speed applications:

- Simultaneous transmission of different media
- Hydraulic oil up to 350 bar; air/gas up to 40 bar; water up to 80 bar;
cooling emulsion up to 120 bar (suitable for dry-running)
- Rotational speeds up to 10,000 rpm
- Compact design
- Simple installation using a cardanic Interface


Smart Rotary Unions and Slip Rings including:

- RFID device identification
- Sensors (temperature, vibrations, ...)
- Data acquisition System (load & condition monitoring)
- Diagnostic software
- Data transmission via cable
GAT Gesellschaft für Antriebstechnik mbH
With KNM 2X, KAPP NILES Metrology offers an analytical gear inspection machine for highly precise measurements of smaller workpieces up to a maximum workpiece diameter of 300 mm.
The KNM 2X combines high-precision mechanics with cutting-edge drive and control technology. All guides and the base plate made of hard stone are long-term stable and have an identical low expansion coefficient. The air spring system under the base plate absorbs vibrations. Ironless linear motors and the torque motor of the rotary table stand for ultimate position and path accuracy.
The state-of-the-art KNM C5 controller determines the optimal drive parameters of every workpiece and clamping device for always ideal measuring dynamics. One highlight of the KNM 2X is the „Smart“ Tailstock which provides an extended work area by motor-driven lowering into the base plate. Another highlight is the „Smart“ Quick Change Clamping System which enables the changeover of workpiece holders, lower tips, or calibration balls within a few seconds to reach a significant reduction of set-up times. The extensive package of evaluation software can be accessed directly by touch screen.
KAPP NILES Metrology GmbH
With the gear profile grinding machine KNe 3P, KAPP NILES offers an inexpensive entry into precision machining as a solution for the flexible production of small and medium lot sizes.
The KNe 3P has been optimised for manual ergonomic loading. Thanks to the low height of the machine bed and the short distance to the machine elements, all operations can be carried out without means. The integrated measuring device allows to measure and to evaluate gear qualities against specifications. The control system Sinumerik 840D sl is used on a 19” touch screen. The innovative, operator-friendly user interface KNgrind allows a machine-oriented and intuitive parameterisation of the machining task.
The profile grinding machine KNe 3P features a grinding spindle with high drive power for components up to module 10 mm. The directly driven rotary table is generously dimensioned for a table load of up to 350 kg. The dresser sits stationary against the tool axis and even allows the use of small grinding wheels of up to 65 mm. The working area can be used without any restriction at large helix angles. Alternatively, the swivel range of the machine allows the grinding of worms.
KAPP GmbH & Co. KG
With the generating gear grinding machine KX 260 TWIN, KAPP NILES offers a high-productive solution to meet the requirements for highest productivity, quality and cost minimisation.
The KX 260 TWIN with a maximum tip diameter of 260 mm is particularly designed for medium and large batch production where quality levels are especially demanding. The machine includes two identical workpiece spindles arranged at opposing sides of an index table. While machining one part, the second workpiece spindle simultaneously unloads / loads and aligns another part. Thus, many of the auxiliary functions are carried out during the machining time, reducing the auxiliary processing time to a minimum.
The control system Sinumerik 840D sl is equipped with an operator-friendly menudriven user interface. The optional measuring device allows to measure and to evaluate gear qualities against specifications. The machine is optimised for automatic loading. As a standardised turnkey solution, a combination of pallet conveyer and gantry loader is provided according to the specific application. Alternative automation methods, such as pallet or robot systems, can also be utilised.
KAPP GmbH & Co. KG
With KNM 2X, KAPP NILES Metrology offers an analytical gear inspection machine for highly precise measurements of smaller workpieces up to a maximum workpiece diameter of 300 mm.
The KNM 2X combines high-precision mechanics with cutting-edge drive and control technology. All guides and the base plate made of hard stone are long-term stable and have an identical low expansion coefficient. The air spring system under the base plate absorbs vibrations. Ironless linear motors and the torque motor of the rotary table stand for ultimate position and path accuracy.
The state-of-the-art KNM C5 controller determines the optimal drive parameters of every workpiece and clamping device for always ideal measuring dynamics. One highlight of the KNM 2X is the „Smart“ Tailstock which provides an extended work area by motor-driven lowering into the base plate. Another highlight is the „Smart“ Quick Change Clamping System which enables the changeover of workpiece holders, lower tips, or calibration balls within a few seconds to reach a significant reduction of set-up times. The extensive package of evaluation software can be accessed directly by touch screen.
KAPP GmbH & Co. KG
Skiving3: Machine – Tool – Process a single source
Gear skiving according to the Liebherr concept has proved itself. Specialists from Liebherr offer competences from a single source in one package.
The foundation is the rigidity by the machine: The cast iron machine bed absorbs resulting process forces. The use of flat guides in all important linear axes provides additional damping. A high spindle rigidity is attained in the machining head using a special bearing concept, in which longer tool holders can be used – this is particularly important for ma-chining internal gears.
In addition to the machine, the appropriate tool is crucial for a stable process. With its in-house tool development and manufacturing, Liebherr can design the optimal tool for every workpiece.
The planned process must be taken into account when de-signing tools. Thanks to intensive technological development and extensive tests with customers, Liebherr understands the interaction between machine and tool and is in a position to be able to offer a skiving machine, tools, and to provide the Skiving³ process.
Liebherr-Verzahntechnik GmbH
spike_Measure forces directly at the tool
What is spike®? A measuring system which detects the cutting forces and moments directly on the tool. Based on measured data, process engineers can do offline diagnosis and process optimization or or machinist can do online monitoring.
How does spike® measure? spike is located on the tool holder or inside the spindle. Via its battery operated spark unit data will be transmitted wirelessly, to a receiver and the machine control.
What is spike®_polar? spike_polar doesn´t only show the forces that affect the tool, but can also determine the direction of action with the the X- and Y-coordinates. In this way the condition of each cutting edge can be precisely defined.
The Use: Identify loss of component quality due to high wear or a broken cutting edge - Change tools before it comes to a tool breakage. Let the forces that affect the tool decide about when to change the tool!
pro-micron GmbH
Headquarter Jinan Lanhai Transmission Machinery Co., Ltd.
Our products have widely used in transmission of Machinery, Electronics, Medical Treatment and Transportation. And our customers have spoken highly of these products because of their excellent quality.
affiliated enterprises:
1, JINAN YUANPING PRECISION INDUSTRY DRIVER TRANSMISSION CO., LTD. (established in 2001, mainly trading)
2, Jinan Lanhai Transmission Machinery Co., Ltd. (established in 2008, based on production, independent brand: PREYP)
3, Germany ROR Machinery GmbH, (founded in 2014, mainly European trading)
4, T-Win Precision Machinery Co.,LTD. (established in 2015, based on production, independent brand: T-WIN)
5, in August 2016 an office is set up in China Woodworking Machinery town Guangdong Lunjiao, focuses on sales woodworking machinery parts.
ROR Machinery GmbH
External thread production of the premium class
Wagner® Tooling Systems is a producer of precision tools for the economic production of external threads and special production steps like beading, knurling, flanging or rolling-in of tubes. With the Wagner® cutting heads, axial rolling heads, thread rolling attachments and multi-cutter turning heads cylindrical and tapered threads can be produced as well as standard and metric threads, pipe threads, acme threads and special threads – right hand threads or left-hand threads.
Further advantages of the WAGNER® tools are crimping, cutting-in, levelling-out, end machining and surface optimization to the point of twist-free surfaces.The continuous development work of our engineers makes sure that our technology belongs to the best of the world. Further information can be obtained from our website: www.wagner-werkzeug.de
Our product range:
- Thread rolling attachments
- Axial rolling heads
- Thread cutting heads
- Multi-cutter turning heads
- Driven tools
Wagner Tooling Systems Baublies
The modular single-spindle WEISSER UNIVERTOR AS 90/400 with the original pick-up System.
Unique, highly productive shaft pick-up lathe for mass production
The modular single-spindle UNIVERTOR AS with the original WEISSER pick-up system is designed especially for dry machining of gear shafts and crank shafts. It is ideally suited for cost-effective complete processing of various lot sizes while meeting very high standards in terms of cutting technology and quality. Right or left machine configuration versions allow the ideal adaptation to various production flow layouts.

The option of technology integration of innovative methods such as rotational turning, hard turning, grinding, drilling or milling causes a significant reduction of internal logistics processes and yields extremely precise machining results. In addition to the excellent dynamics and high rapid speeds, the UNIVERTOR AS series has very good damping properties and thus an excellent accuracy performance.

In combination with the UNIVERTOR AS/4 for 4-axis soft machining, and the universal UNIVERTOR AE cutting and centring machine, complete machining is very efficiently.
J.G. WEISSER SÖHNE GmbH & Co. KG